You are here: Products : GALLERY

Gallery End Caps Silver

$1.40

$1.99 30% OFF!


End caps are used to finish off the Artrack rail, providing a clean and sleek look to your display wall. Each pack includes 2 end caps.

 

Installation Instructions

Once you have firmly attached the Artrack rail to the wall (1), clip the end cap to the end of the track (2). Note each end cap has a left or right side.


Product Code: EndGS
Qty:

Gallery Track Silver - 2metre length
product code - 689076076821

Gallery Track Silver - 2metre length

$33.66 30% OFF!


The anodized track can be cut to size or connected with another piece. Spec: Size: 200cmL x 3cmW x 1cmD, Product includes; Fixing clips, wall screws, silver left and right end caps. .

Installation Instructions

  1. Using a string line, spirit level or laser level, mark a line at the desired height for the artrack fixings.
  2. Along the line, mark out your fixing positions. If mounting on masonary or concrete use a 5mm masonary bit to drill pilot holes (1).
  3. Once the fixing holes are marked and drilled you then need to attach the fixing clips to the wall (2). Different wall€s will require different wall anchors depending on your surface, Plasterboard = Wall Mates + Screws, Concrete or Cavity Brick = Wall Plugs + Screws, Studded Wall = Wood Screws.
  4. Once your fixing clips are mounted to the wall, simply install your track by pushing the track onto the fixing clips (3).
  5. Make sure the track is secure on the wall before attaching your hanging accessories.
$23.56
Qty:

Gallery Track White - 2metre length
product code - 689076077125

Gallery Track White - 2metre length

$33.66 30% OFF!


This powder coated white track can be cut to size or connected with another piece. Specs: Size: 200cmL x 3cmW x 1cmD. Product Includes; Fixing Clips, wall screws, white left and right end caps. .

Installation Instructions

  1. Using a string line, spirit level or laser level, mark a line at the desired height for the artrack fixings.
  2. Along the line, mark out your fixing positions. If mounting on masonary or concrete use a 5mm masonary bit to drill pilot holes (1).
  3. Once the fixing holes are marked and drilled you then need to attach the fixing clips to the wall (2). Different walls will require different wall anchors depending on your surface, Plasterboard = Wall Mates + Screws, Concrete or Cavity Brick = Wall Plugs + Screws, Studded Wall = Wood Screws.
  4. Once your fixing clips are mounted to the wall, simply install your track by pushing the track onto the fixing clips (3).
  5. Make sure the track is secure on the wall before attaching your hanging accessories.
$23.56
Qty:
Gallery End Caps Silver
Gallery End Caps SilverGallery End Caps Silver
Insitu and Packaging