Gallery Picture Hook

1. Using a string line, spirit level or laser level, mark a line at the desired height for the artrack fixings.
2. Along the line, mark out your fixing positions. If mounting on masonary or concrete use a 5mm masonary bit to drill pilot holes (1).
3. Once the fixing holes are marked and drilled you then need to attach the fixing clips to the wall (2). Different wall€s will require different wall anchors depending on your surface, Plasterboard = Wall Mates + Screws, Concrete or Cavity Brick = Wall Plugs + Screws, Studded Wall = Wood Screws.
4. Once your fixing clips are mounted to the wall, simply install your track by pushing the track onto the fixing clips (3).
5. Make sure the track is secure on the wall before attaching your hanging accessories.

1. Using a string line, spirit level or laser level, mark a line at the desired height for the artrack fixings.
2. Along the line, mark out your fixing positions. If mounting on masonary or concrete use a 5mm masonary bit to drill pilot holes (1).
3. Once the fixing holes are marked and drilled you then need to attach the fixing clips to the wall (2). Different walls will require different wall anchors depending on your surface, Plasterboard = Wall Mates + Screws, Concrete or Cavity Brick = Wall Plugs + Screws, Studded Wall = Wood Screws.
4. Once your fixing clips are mounted to the wall, simply install your track by pushing the track onto the fixing clips (3).
5. Make sure the track is secure on the wall before attaching your hanging accessories.

Feed the cable end through the picture hook (1) and slide the fitting to the desired height (2). Attach your item to the hook (3). To release, push the plunger down and move the fitting.

Choose the desired spot on your picture frame for the D Ring to be attached. Ensure both the left and right side is of equal height. Screw D Ring into the frame.

Affix one end of your picture wire to the left of your painting, run the length of wire along your artwork back. Affix the right side of the wire length to the right side of the painting, making sure the wire is tight.

Once you have firmly attached the Artrack rail to the wall (1), attach the hanging cable from either end of the track, then slide the cable along the track to your desired spot (2).